php教程

require

(PHP 4, PHP 5, PHP 7)

requireinclude 几乎完全一样,除了处理失败的方式不同之外。require 在出错时产生 E_COMPILE_ERROR 级别的错误。换句话说将导致脚本中止而 include 只产生警告(E_WARNING),脚本会继续运行。

参见 include 文档了解详情。

User Contributed Notes

phpDev a t eSurfers_dot_ com 25-Sep-2016 03:19
I didn't find mention that calling return from inside an required file is different than calling return from inside an included file.

return "aaa"; if called in the global scope of an included file will terminate the inclusion and return control to the main file givin "aaa" as a result of the include statement itself.

As far as I have tested (PHP 5.6.10) this does not apply to require
dank at kegel dot com 19-Jul-2015 05:46
PHP's require and include seem to differ from C's include in another way: they can't be used in the middle of an expression.  e.g.

$ more foo1.php foo2.php
::::::::::::::
foo1.php
::::::::::::::
<?php
print "hello"
.
#"there"
require 'foo2.php';
.
"\n";
?>
::::::::::::::
foo2.php
::::::::::::::
"there"
$ php foo1.php
PHP Parse error:  syntax error, unexpected '.' in foo1.php on line 6

So php's include operates only on complete statements, whereas c's include operates on bytes of source code.
theunis dot botha1 at gmail dot com 11-Sep-2014 11:33
Just for those who may wonder about receiving E_WARNING (in custom error handlers) - PHP generates an E_WARNING when require or require_once fails - and before control returns to your script, it generates an E_COMPILE_ERROR.

So when require() or require_once() fails - don't be surprised to see two messages in your logs (if you have your logging setup this way) - once for the E_WARNING caught by your custom error handler, and once for getting the error from error_get_last() in your shutdown function (which is the actual E_COMPILE_ERROR you were expecting)
moreau dot marc dot web at gmail dot com 07-Feb-2014 10:10
Petit script pour résoudre le problème de l'inclusion dans l'inclusion.

A requiert B qui requiert C -> l'on doit normalement faire correspondre le requiere de B en fonction de l'endroit ou se trouve A dans l'arborescence du site. Pas de souci, sauf si l'on est amené à requérir B depuis une autre page, impossible alors de faire appel au C -> cela retourne une erreur "fichier non trouvé".

Voici une solution qui marche sur tout type de configuration:

Dans B:

<?php

chdir
(__DIR__); //Sert à indiquer à PHP le dossier de référence de travail

$file_to_require=realpath('./../../adresse_de_C_relative_par_raport_a_B.php'); //Crée l'adresse absolue de C

require($file_to_require); unset($file_to_require);

?>
hans at ratzinger dot com 01-Sep-2013 05:25
Thanks a lot for this information Brian! This drove me nuts for many hours! This is the first information I found in the web that a white page can be caused by a require -> your script will die if the file is not found!!!
Wing 10-May-2010 05:04
if you want always include, require, open files using some 'root' folder based path you may may put file '.htroot' in 'root' folder and  use this.

while(!file_exists(getcwd()."/.htroot")){chdir('..');}

This code change current dir to dir where '.htroot' file located and everywhere you can use relative to 'root' paths.

Please avoid absent of '.htroot' file.
pedro dot evangelista at gmail dot com 16-Dec-2008 06:23
Be careful when using symbolic links, because require will search the real path of the file and not the path relative to the symbolic link.

Imagine your script A.php resides on directory /a and you create a symbolic link for it on directory /b/c.
So for the code

<?php
echo realpath("../");
?>

you might expect the directory /b, but actually you get the root directory /.

If you need to include the file /b/B.php inside your A.php, you can't use the following

<?php
require "../B.php";
?>

because it will search the root directory, not the /b directory.

Regards.
duccio at getlocal dot it 23-Nov-2008 01:37
In response to some dot user at notarealdomain dot com:

This is because require executes the code "as if" it was code written inside of the function, inheriting everything including the scope. But here there is something even more interesting:

<requiredfile.php>:
<?php

$this
->a.=" is visible also under a require\n";
$b="While the variable b is a local variable of the function\n";
function
FunctionUnderRequire() {
    echo
"But the functions declared inside of a require called from a class function, just as when defined from inside any other function, are always global\n";
}
?>

<mainfile.php>:
<?php

error_reporting
(E_ALL|E_STRICT);

class
UserClass {

    protected
$a;

    public function
UserFunction() {
       
$this->a='The class variable a';
        require
'requiredfile.php';
        echo
$this->a; // "The class variable a  is visible also under a require\n"
       
echo $this->b; // Notice: Undefined property: UserClass::$b
       
echo $b; // "While the variable b is a local variable of the function\n"
       
$this->FunctionUnderRequire(); //Fatal error!
       
FunctionUnderRequire(); // "But the functions..."
   
}
}

$UserClass=new UserClass;
$UserClass->UserFunction();
?>

I'm wondering if there is a method for declaring class public/private/protected functions from inside a require/include...
ricardo dot ferro at gmail dot com 14-May-2008 11:15
Two functions to help:

<?php

function add_include_path ($path)
{
    foreach (
func_get_args() AS $path)
    {
        if (!
file_exists($path) OR (file_exists($path) && filetype($path) !== 'dir'))
        {
           
trigger_error("Include path '{$path}' not exists", E_USER_WARNING);
            continue;
        }
       
       
$paths = explode(PATH_SEPARATOR, get_include_path());
       
        if (
array_search($path, $paths) === false)
           
array_push($paths, $path);
       
       
set_include_path(implode(PATH_SEPARATOR, $paths));
    }
}

function
remove_include_path ($path)
{
    foreach (
func_get_args() AS $path)
    {
       
$paths = explode(PATH_SEPARATOR, get_include_path());
       
        if ((
$k = array_search($path, $paths)) !== false)
            unset(
$paths[$k]);
        else
            continue;
       
        if (!
count($paths))
        {
           
trigger_error("Include path '{$path}' can not be removed because it is the only", E_USER_NOTICE);
            continue;
        }
       
       
set_include_path(implode(PATH_SEPARATOR, $paths));
    }
}

?>
Peter McDonald 15-Oct-2007 09:21
re the comment by moazzamk at gmail dot com

As the manual states require and require_once as of PHP 4.02 no longer call the file if the line of code it is on should not be executed.
scott 20-Sep-2007 01:27
If you want to verify that a file can be included or required, the simplest solution I've found is just to check that the file exists.

<?php

   
if(file_exists($pageContentInc)){
        require_once
$pageContentInc;
    }else{
       
$pageContentInc = "common/content_404.inc";
        require_once
$pageContentInc;
    }
?>

Does it really need to be any harder than that?
daniel at nohair dot com 06-Sep-2007 07:24
I love php.  But when file can't be included, 'require' or 'require_once' throw fatal error and halt the script, which is almost never desirable on a mission-critical production server.  I think it may be better to use something like the following. 

<?php

if (@include 'plan_A.php') {
   
// Plan A;
} elseif (@include 'plan_B.php') {
   
// Plan B;
} else {
   
// Hope never happens.  If does, then Email the webmaster;
    // Call 911, Medic, Fire, Police, the president;
    // Change hard drive, server, hosting service;
}

?>

Or handle trouble first is you wish

<?php

if (!@include 'plan_A.php') {
   
// Someone has kidnapped/corrupted Plan_A.php;
    // Email the webmaster;
    // Change hard drive, server, hosting service;
} else {
   
// Plan A;
}

?>
some dot user at notarealdomain dot com 11-Jul-2007 07:58
Discovered a bit of weird behavior yesterday involving require() (using PHP 5.2.3).  If you use require() inside a function, the "globals" in the file will be local to the function.  An example of this:

test.php:
<?php
 
function TestFunc()
  {
    require(
'test2.php');
    echo
"<pre>" . print_r($GLOBALS, true) . "</pre>";
  }
?>

test2.php:
<?php
  $MyTestGlobal
= Array();
?>

This happens because require is a statement that _inlines_ the target code - not a function that gets called.

To fix this, use the $GLOBALS superglobal:

test2.php:
<?php
  $GLOBALS
["MyTestGlobal"] = Array();
?>
chris at chrisstockton dot org 19-Jun-2007 05:06
Remember, when using require that it is a statement, not a function. It's not necessary to write:
<?php
 
require('somefile.php');
?>

The following:
<?php
require 'somefile.php';
?>

Is preferred, it will prevent your peers from giving you a hard time and a trivial conversation about what require really is.
31-Jan-2007 03:38
A note that drove me nuts for 2 days!

Be carfull if you have a newline or blank space befor your php tags in the included/required file it will read as html and outputed.

If your running your output through javascript string evaluations which would be sensitive to newlines/white spaces be carfull that the first chars in the file are the php tages eg <?php
bmessenger at 3servicesolution dot com 17-Oct-2006 01:06
// Looks like I might have a fix for some on the
// relative path issue.

if (!function_exists('bugFixRequirePath'))
{
    function bugFixRequirePath($newPath)
    {
        $stringPath = dirname(__FILE__);
        if (strstr($stringPath,":")) $stringExplode = "\\";
        else $stringExplode = "/";
       
        $paths = explode($stringExplode,$stringPath);
       
        $newPaths = explode("/",$newPath);
       
        if (count($newPaths) > 0)
        {
            for($i=0;$i<count($newPaths);$i++)
            {
                if ($newPaths[$i] == "..") array_pop($paths);   
            }
           
            for($i=0;$i<count($newPaths);$i++)
            {
                if ($newPaths[$i] == "..") unset($newPaths[$i]);
            }
           
            reset($newPaths);
           
            $stringNewPath = implode($stringExplode,$paths).
                $stringExplode.implode($stringExplode,$newPaths);
           
                return $stringNewPath;
        }
    }   
}

require_once(bugFixRequirePath("../config.php"));
gabe at websaviour dot com 13-Jul-2006 05:42
If you are experiencing a bug related to using relative paths with include or require, it may be related to a grandparent directory that is executable but not readable.  It will cause __FILE__ to return a relative path instead of the full path which it is supposed to show.  This manifests itself in interesting ways that can be seemingly unrelated.  For instance, I discovered it using the Smarty {debug} command which failed to find its template due to this issue.  Please see the following for more details:

http://bugs.php.net/bug.php?id=34552
http://shiftmanager.net/~kurt/test/
Inc 31-May-2006 08:35
I have found a problem when I try to access a php file via require($class_directory)

// # $class_directory contain a long full path and dot into the last folder.
// # $class_directory = "/var/.../app/system/plugintoto_1.0/class_plugintoto_1.0.php";

// dot ('.') and minus ('-') are not accepted in require !
tjeerd 11-May-2006 06:41
When using symbolic links with PHP, specify a dotslash './page.php' path to ensure that PHP is looking in the right directory with nested requires:

E.g. when the required actual page1.php contains other require statements to, say page2.php, PHP will search the path that the symbolic link points to, instead of the path where the symbolic link lives. To let PHP find the other page2.php in the path of the symbolic link, a require('./page2.php'); statement will solve the puzzle.
webmaster at netgeekz dot net 24-Feb-2006 09:34
I have learnt to manipulate this code into an effecitve and easy to use form. I use it with require_once, but it could be used for require.

require_once($_SERVER['DOCUMENT_ROOT'].'/includes/top.php');

This mainly jumps back to the servers document root and then begins to enter the directories defined until it finds the file. In this case it would go back to the root of the server, or whatever your document root is, and then enter includes. there it would search for the top.php file. Simple to use, yet effective...espcially for people like me who re-use code or move files to different directories. I don't have to fix the includes, because they all work the same way.
dave at davidhbrown dot us 22-Jan-2006 12:08
re: danielm at unb dot br...

$_SERVER['DOCUMENT_ROOT'] is very useful, but it is not available with all web servers. Apache has it; IIS doesn't.

I use the following to make my PHP applications work in more situations:
<?php
if (!defined("BASE_PATH")) define('BASE_PATH', isset($_SERVER['DOCUMENT_ROOT']) ? $_SERVER['DOCUMENT_ROOT'] : substr($_SERVER['PATH_TRANSLATED'],0, -1*strlen($_SERVER['SCRIPT_NAME'])));
?>

...but even that gets tripped up by symlinks to different mount points, etc. You could substitute realpath($_SERVER['PATH_TRANSLATED']), but that function has been reported not to work on some (Windows) servers. One could use the PATH_TRANSLATED for both servers, but I figure if Apache is going to tell me exactly what I want to know, I should listen.
Marc 06-May-2005 10:42
This will sound elementary, but for C++ native programmers, be sure NOT to put a '#' in front of your include statements! The parser will not give you an error, but also will not include the file, making for a tedious debugging process.

In short, USE:
<?php
    
include "yourfile.php";
?>

and DON'T use:
<?php
    
#include "yourfile.php";
?>
richardbrenner(-at- )gmx(-)at 07-Apr-2005 01:58
If you use relativ paths in a php script (file A) that can be required by another php script (file B), be aware that the relativ paths in file A will be relativ to the directory, where file B is stored.
You can use the following syntax in file A, to be sure that the paths are relativ to the directory of file A:

<?
require(dirname(__FILE__)."/path/relative/file_to_include.php");
?>

Greetings,
Richard
10-Feb-2005 10:29
Note when calling any require or include function, that the call will block if the script given as the parameter is excecuting.
Because of this one should be careful when using blocking functions like sleep() in a script which is included by another.
danielm at unb dot br 21-Nov-2004 11:50
if you want to include files with an absolut path reference, you can use:

require ($_SERVER["DOCUMENT_ROOT"]."/path/to/file.php");

this way you can organize your files in subdirectories trees.

CopyRight © 2008-2022 verySource.Com All Rights reserved. 京ICP备17048824号-1 京公网安备:11010502034788