php教程

SoapClient::SoapClient

(PHP 5, PHP 7)

SoapClient::SoapClient — SoapClient constructor

说明

public SoapClient::SoapClient ( mixed $wsdl [, array $options ] )

This constructor creates SoapClient objects in WSDL or non-WSDL mode.

参数

wsdl

URI of the WSDL file or NULL if working in non-WSDL mode.

Note:

During development, WSDL caching may be disabled by the use of the soap.wsdl_cache_ttl php.ini setting otherwise changes made to the WSDL file will have no effect until soap.wsdl_cache_ttl is expired.

options

An array of options. If working in WSDL mode, this parameter is optional. If working in non-WSDL mode, the location and uri options must be set, where location is the URL of the SOAP server to send the request to, and uri is the target namespace of the SOAP service.

The style and use options only work in non-WSDL mode. In WSDL mode, they come from the WSDL file.

The soap_version option should be one of either SOAP_1_1 or SOAP_1_2 to select SOAP 1.1 or 1.2, respectively. If omitted, 1.1 is used.

For HTTP authentication, the login and password options can be used to supply credentials. For making an HTTP connection through a proxy server, the options proxy_host, proxy_port, proxy_login and proxy_password are also available. For HTTPS client certificate authentication use local_cert and passphrase options. An authentication may be supplied in the authentication option. The authentication method may be either SOAP_AUTHENTICATION_BASIC (default) or SOAP_AUTHENTICATION_DIGEST.

The compression option allows to use compression of HTTP SOAP requests and responses.

The encoding option defines internal character encoding. This option does not change the encoding of SOAP requests (it is always utf-8), but converts strings into it.

The trace option enables tracing of request so faults can be backtraced. This defaults to FALSE

The classmap option can be used to map some WSDL types to PHP classes. This option must be an array with WSDL types as keys and names of PHP classes as values.

Setting the boolean trace option enables use of the methods SoapClient->__getLastRequest, SoapClient->__getLastRequestHeaders, SoapClient->__getLastResponse and SoapClient->__getLastResponseHeaders.

The exceptions option is a boolean value defining whether soap errors throw exceptions of type SoapFault.

The connection_timeout option defines a timeout in seconds for the connection to the SOAP service. This option does not define a timeout for services with slow responses. To limit the time to wait for calls to finish the default_socket_timeout setting is available.

The typemap option is an array of type mappings. Type mapping is an array with keys type_name, type_ns (namespace URI), from_xml (callback accepting one string parameter) and to_xml (callback accepting one object parameter).

The cache_wsdl option is one of WSDL_CACHE_NONE, WSDL_CACHE_DISK, WSDL_CACHE_MEMORY or WSDL_CACHE_BOTH.

The user_agent option specifies string to use in User-Agent header.

The stream_context option is a resource for context.

The features option is a bitmask of SOAP_SINGLE_ELEMENT_ARRAYS, SOAP_USE_XSI_ARRAY_TYPE, SOAP_WAIT_ONE_WAY_CALLS.

The keep_alive option is a boolean value defining whether to send the Connection: Keep-Alive header or Connection: close.

The ssl_method option is one of SOAP_SSL_METHOD_TLS, SOAP_SSL_METHOD_SSLv2, SOAP_SSL_METHOD_SSLv3 or SOAP_SSL_METHOD_SSLv23.

错误／异常

SoapClient::SoapClient() will generate an E_ERROR error if the location and uri options aren't provided in non-WSDL mode.

A SoapFault exception will be thrown if the wsdl URI cannot be loaded.

更新日志

版本 说明
5.5.0 New ssl_method option.
5.4.0 New keep_alive option.

范例

Example #1 SoapClient::SoapClient() example

<?php

$client = new SoapClient("some.wsdl");

$client = new SoapClient("some.wsdl", array('soap_version'   => SOAP_1_2));

$client = new SoapClient("some.wsdl", array('login'          => "some_name",
                                            'password'       => "some_password"));

$client = new SoapClient("some.wsdl", array('proxy_host'     => "localhost",
                                            'proxy_port'     => 8080));

$client = new SoapClient("some.wsdl", array('proxy_host'     => "localhost",
                                            'proxy_port'     => 8080,
                                            'proxy_login'    => "some_name",
                                            'proxy_password' => "some_password"));

$client = new SoapClient("some.wsdl", array('local_cert'     => "cert_key.pem"));

$client = new SoapClient(null, array('location' => "http://localhost/soap.php",
                                     'uri'      => "http://test-uri/"));

$client = new SoapClient(null, array('location' => "http://localhost/soap.php",
                                     'uri'      => "http://test-uri/",
                                     'style'    => SOAP_DOCUMENT,
                                     'use'      => SOAP_LITERAL));

$client = new SoapClient("some.wsdl", 
  array('compression' => SOAP_COMPRESSION_ACCEPT | SOAP_COMPRESSION_GZIP));

$client = new SoapClient("some.wsdl", array('encoding'=>'ISO-8859-1'));

class MyBook {
    public $title;
    public $author;
}

$client = new SoapClient("books.wsdl", array('classmap' => array('book' => "MyBook")));

?>

User Contributed Notes

psy at psyberware dot com 11-Feb-2019 09:54
If you try to use a 'stream_context' option to set additional HTTP headers, you should be aware of a couple of things.

First, even if you are using a https URL, the 'header' will be pulled from the 'http' section:

$context = stream_context_create([
            'https' => [
                'header' => 'Test: this will be ignored'
            ],
            'http' => [
                'header' => 'Test: this will be used'
            ]
]);

Second, there are a number of headers that are ignored, and will never be used. Check the underlying C source file soap/php_http.c and search for "skip some predefined headers" for a list.  This is the reason some people report problems trying to set Host, Authorization, and other headers in certain situations.
Flaviu 26-Jun-2018 06:41
When using classmap, the class constructors are NOT called.
If you want to do additional "magic", you can use the __set() / __get() combo.
Register a class with a "container" property alone and use the 2 magic methods.

Have fun
Thomas Van Canegem 08-Feb-2018 04:21
Further explanation regarding the cache options in WSDL mode:

WSDL_CACHE_MEMORY:
Will do a request and cache the WSDL's xml when instantiating the SoapClient object for the first time; invoked by EVERY request.

WSDL_CACHE_DISK:
Will do a request and cache the WSDL's xml the first time the SoapClient object is instantiated by A request.
ryan dot jentzsch at gmail dot com 28-Nov-2017 10:19
The documentation is wrong (version 7.1.12): A SoapFault exception will be thrown if the wsdl URI cannot be loaded.

What actually occurs -- even if wrapped in a try...catch(\Throwable $t) -- is an UNCATCHABLE fatal error is thrown.
mkroese at eljakim dot nl 29-Mar-2017 11:27
Do note that *contrary* to the ssl context option (http://php.net/manual/en/context.ssl.php#context.ssl.local-pk),  `local_pk` is NOT a valid option. For the `local_cert` option, you should combine the private key with the certificate file.

Alternatively, if you do want to keep the private key and certificate file separate, you can create a stream context and pass that as the `context` option:

<?php
$context = stream_context_create([
  'ssl' => [
   'local_cert' => '/path/to/cert/file',
   'local_pk'   => '/path/to/private/key'
  ]]);

$client = new \SoapClient($wsdl, [
  'context' => $context,
  // other options
]);
fschmidt at informatik dot uni-leipzig 07-Dec-2016 12:06
In local_cert, the order of the certificates is relevant. After the key, first add the client certificate, then the rest of the chain. Offering the certificate chain before the client cert or only adding it to the system capath will result in an "alert unknown ca".
cdesully at webslicer dot com 30-Mar-2016 06:39
I found a good use for typemap.  When using classmap any xml tags that had attributes, attribute values were not captured, so a typemap allows you to override how a class gets implemented and being able to get any attributes not previously captured.

<ItemList>
    <Item productId="1234">
        <feature>red</feature>
    </Item>
    <Item productId="5678">
        <feature>blue</feature>
    </Item>
</ItemList>

<?php //semi-pseudo code
namespace ExampleNS;

class ItemList {
    public $item = [];
}
class Item {
    public $productId;
    public $feature;
}

class Service {
    public function __construct(){
        $options = [
            'classmap' => [
                'ItemList' => 'ExampleNS\ItemList',
                'Item' => 'ExampleNS\Item'
            ],
            'typemap'=>[
                'type_ns' => 'http://some.wsdl.ns/sdo',
                'type_name' => 'Item',
                'from_xml' => [__CLASS__,'newConversion']
            ]
        ];
    }

    public function newConversion($xml){
        return simplexml_load_string($xml);
        //or more appropriately dig into the simplexml object and
        //instantiate the correct classes intended to be defined and
       //return those
    }
}
?>
Anonymous 10-Dec-2015 08:24
After installing PHP 7 on my test server I was receiving a 500 - Internal Server error when instantiating a new SoapClient. If there's an existing wsdl cache file, it needs to be deleted.
omidkosari at yahoo dot com 25-Jun-2015 04:05
To solve the problem with a lot of FIN_WAIT2 or CLOSE_WAIT , you should use the option keep_alive=false
info at nospam x valiton x com 20-Apr-2015 01:00
CAUTION:
I had quite a bit of trouble trying to make a request with fopen through a proxy to a secure url.  I kept getting a 400 Bad Request back from the remote host.  It was receiving the proxy url as the SNI host.  In order to get around this I had to explicity set the SNI host to the domain I was trying to reach.  It's apparently the issue outlined in this bug:

https://bugs.php.net/bug.php?id=63519

<?php
$domain = parse_url($file, PHP_URL_HOST);
$proxy_string = "tcp://" . WP_PROXY_HOST  . ":" . WP_PROXY_PORT;
$opts = array(
    'http' => array( 'proxy' => $proxy_string ),
    'ssl' => array( 'SNI_enabled' => true, 'SNI_server_name' => $domain));
$context = stream_context_create($opts);
$handle = fopen( $file, 'r', false, $context );
?>

src:
http://php.net/manual/en/context.http.php#114314
champetier dot etienne at gmail dot com 23-Mar-2015 02:30
When using classmap, never put a fully qualified classname (starting with \)
there is a bug (https://bugs.php.net/bug.php?id=69280)
softontherocks at gmail dot com 02-Dec-2014 07:38
I posted in this URL http://softontherocks.blogspot.com/2014/02/web-service-soap-con-php.html a full example of a nusoap web service.

There is defined the server and the client who calls the web service.

I hope it would be useful for you.
joshua at wiredrive dot com 22-Oct-2014 11:42
As of 5.5, ssl_method defaults to SOAP_SSL_METHOD_SSLv23. Just wanted to add this because it was not explicitly specified above.
Peter 08-May-2014 02:18
if you need to use ws-security with a nonce and a timestamp, you can use this :

<?php

class WsseAuthHeader extends SoapHeader {

private $wss_ns = 'http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd';
private $wsu_ns = 'http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd';

function __construct($user, $pass) {

    $created = gmdate('Y-m-d\TH:i:s\Z');
    $nonce = mt_rand();
    $passdigest = base64_encode( pack('H*', sha1( pack('H*', $nonce) . pack('a*',$created).  pack('a*',$pass))));

    $auth = new stdClass();
    $auth->Username = new SoapVar($user, XSD_STRING, NULL, $this->wss_ns, NULL, $this->wss_ns);
    $auth->Password = new SoapVar($pass, XSD_STRING, NULL, $this->wss_ns, NULL, $this->wss_ns);
    $auth->Nonce = new SoapVar($passdigest, XSD_STRING, NULL, $this->wss_ns, NULL, $this->wss_ns);
    $auth->Created = new SoapVar($created, XSD_STRING, NULL, $this->wss_ns, NULL, $this->wsu_ns);

    $username_token = new stdClass();
    $username_token->UsernameToken = new SoapVar($auth, SOAP_ENC_OBJECT, NULL, $this->wss_ns, 'UsernameToken', $this->wss_ns);

    $security_sv = new SoapVar(
        new SoapVar($username_token, SOAP_ENC_OBJECT, NULL, $this->wss_ns, 'UsernameToken', $this->wss_ns),
        SOAP_ENC_OBJECT, NULL, $this->wss_ns, 'Security', $this->wss_ns);
    parent::__construct($this->wss_ns, 'Security', $security_sv, true);
}
}

?>

and with your SoapClient do :

<?php
$client = new SoapClient("http://host/path");
$client->__setSoapHeaders(Array(new WsseAuthHeader("user", "pass")));
?>

works for me. based on a stackoverlfow post which only did the username and password, not the nonce and the timestamp
michael dot arnauts at gmail dot com 29-Jan-2014 03:53
This doesn't seem to be documented, but when you want to use compression for your outgoing requests, you have to OR with the compression level:

<?php
 $client = new SoapClient("some.wsdl",
  array('compression' => SOAP_COMPRESSION_ACCEPT | SOAP_COMPRESSION_GZIP | 9));
?>

This can be really usefull if you want to send large amounts of data.

Source: https://bugs.php.net/bug.php?id=36283
tolean dot dj at gmail dot com 13-Aug-2013 02:21
Here's a function for easier debugging:

<?php
function soapDebug($client){

    $requestHeaders = $client->__getLastRequestHeaders();
    $request = prettyXml($client->__getLastRequest());
    $responseHeaders = $client->__getLastResponseHeaders();
    $response = prettyXml($client->__getLastResponse());

    echo '<code>' . nl2br(htmlspecialchars($requestHeaders, true)) . '</code>';
    echo highlight_string($request, true) . "<br/>\n";

    echo '<code>' . nl2br(htmlspecialchars($responseHeaders, true)) . '</code>' . "<br/>\n";
    echo highlight_string($response, true) . "<br/>\n";
}

$client = new SoapClient(null, array(
    'location' => 'http://sita.local/_mpay/server.php',
    'uri' => 'http://sita.local/_mpay/',
    'trace' => 1,
));

$result = $client->__soapCall('getDate', array('format' => 'Y-m-d H:i:s'));
soapDebug($client);
?>
pgl at yoyo dot org 09-Apr-2013 12:21
Note that if libxml_disable_entity_loader() has been called, you cannot specify a WSDL file - you'll get an error that PHP "failed to load external entity".

To resolve this, add

<?php
libxml_disable_entity_loader(false);
?>

Above any calls to instantiate SoapClient.
francesco [at] paladinux [dot] net 15-Mar-2013 08:43
Where you have the problem of
"looks like we got no XML document SoapClient", really the real problem is the xml code from remote server is not clear (after last tag is possible that you have space or other caracter that the your supplier of service have lost :  no one is perfect!)
I've read some solution, like here, but you must to know that is possible, that is possible that the remote server don't wrong, and the "surplus" (latin word for added values) is needed.
In particolar with axis Java server, is possible that the configuration of server is needed and the "surplus" is one or more attachments...
The solution is 3:
1) contact your supplier if is possible to remove caracter if is an error (good luck! ;) )
2) use another class like nusoap resolve the problem (but has other problem!)
3) this technical solution:
when call the wsdl be sure that the option trace and exceptions are setted (the first true and the second false)

<?php
$SoapClient = new SoapClient(NULL,
          array(
....
            'trace'          => 1,
        'exceptions'      => 0
          )
?>
(if you don't do that you can't use the __getLastResponse)

Now You can do the request and use __getLastResponse() to obtain all the part..
<?php
$result  = $SoapClient -> problematicCall($par);
?>

After all  you obtain a variable like that:

-----=_Part_9325_126764118.1363377774664
Content-Type: text/xml; CHARSET=gb2312
Content-Transfer-Encoding: binary
Content-Id: <1C06F7FBA057796C5A6185605F9F93E4>

<?xml version="1.0" encoding="utf-8"?><...etc >&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&gt;

&lt;MESSAGGIO&gt;
  &lt;DA&gt;MI&lt;/DA&gt;
  &lt;A&gt;PALADINUX&lt;/A&gt;
  &lt;ID&gt;12345&lt;/ID&gt;
  &lt;TIPODOC&gt;RC&lt;/TIPODOC&gt;
  &lt;RISPOSTA&gt;
&lt;/MESSAGGIO&gt;
</rxproblematicCallReturn></ns1:rxCatalogoMaterialiResponse></soapenv:Body></soapenv:Envelope>
------=_Part_9325_126764118.1234567890123
Content-Type: application/zip
Content-Transfer-Encoding: binary
Content-Id: <43E91F7E7PALADINUXE07BF041A7BAC9>
-------------------------

Is easy understand if the added part is needed or not!
Now you can explode all the part and parse!

Hope this can help you.See ya in the cyberspace!
ale dot comp_06 at xox dot ch 11-Jun-2012 07:56
If your service is protected through basic http authentication and you're not using wsdl, you will have to put the login in the SoapClient's option:

<?php
$client = new SoapClient(
    null,
    array(
        'soap_version' => SOAP_1_2,
        'location' => ...
        ...,
        'login' => 'username',
        'password' => '*******',
    )
);
?>
chris at phblock dot atNoSpam 04-Nov-2011 05:57
this is the syntax of typemap (found at http://svn.php.net/viewvc/php/php-src/trunk/ext/soap/tests/typemap012.phpt?view=markup)
<?php
$options=Array(
'typemap' => array(
array("type_ns"  => "http://schemas.nothing.com",
         "type_name" => "soap",
         "to_xml"  => "some_funktion_name")
));
?>
Chris Gunawardena 15-Aug-2011 12:56
To monitor SOAP calls in and out of a unix server:

sudo tcpdump -nn -vv -A -s 0 -i eth0 dst or src host xxx.xxx.xxx.xxx and port 80

And always use 'cache_wsdl' => WSDL_CACHE_NONE
svenr at selfhtml dot org 27-Jul-2011 03:51
The "classmap" option actually is a mapping from the "ComplexType" used within the SOAP to your PHP Classes.

Do not confuse the XML tag names returned for your request with these ComplexTypes. SOAP allows them to be different.

I had something like this:
...
<soapenv:body>
<ns1:TagName>
  <ns1:Content>FooBar</ns1:Content>
</ns1:TagName>
</soapenv:body>

TagName is not the key you want to put in your classmap, you have to know the name of the ComplexType this TagName refers to. This info is contained inside the WSDL resource.
willem dot stuursma at hyves dot nl 30-May-2011 02:00
If you want to use classes in a different namespace in your classmap, just use the backslash in the the target class name.

Example:
<?php
$classmap = array('result' => 'MyNamespace\\Result');
?>

You need to specify the backslash twice because it is the escape character in strings.
simonlang at gmx dot ch 06-Apr-2011 06:35
Example for a soap client with HTTP authentication over a proxy:

<?php
new SoapClient(
    'service.wsdl',
    array(
        // Stuff for development.
        'trace' => 1,
        'exceptions' => true,
        'cache_wsdl' => WSDL_CACHE_NONE,
        'features' => SOAP_SINGLE_ELEMENT_ARRAYS,

        // Auth credentials for the SOAP request.
        'login' => 'username',
        'password' => 'password',

        // Proxy url.
        'proxy_host' => 'example.com', // Do not add the schema here (http or https). It won't work.
        'proxy_port' => 44300,

        // Auth credentials for the proxy.
        'proxy_login' => NULL,
        'proxy_password' => NULL,
    )
);
?>

Providing an URL to a WSDL file on the remote server (which as well is protected with HTTP authentication) didn't work. I downloaded the WSDL and stored it on the local server.
Asaf Meller 13-Jan-2011 05:57
a full working php .net soap configuration :
notes
1. web.config on .net server must work with basichttp binding.
2. paramaters to soap functions must be passed as :
array ('parm1_name'=>'parm1_value',
         'parm2_name'=>'parm2_value'...)

<?php
header('Content-Type: text/plain');

try {
            $options = array(
                'soap_version'=>SOAP_1_1,
                'exceptions'=>true,
                'trace'=>1,
                'cache_wsdl'=>WSDL_CACHE_NONE
            );
            $client = new SoapClient('http://www.example.com/end_point.wsdl', $options);
    // Note where 'Get' and 'request' tags are in the XML
           
        } catch (Exception $e) {
            echo "<h2>Exception Error!</h2>";
            echo $e->getMessage();
        }

echo 'running HelloWorld :';                                     
 
 try {
   $response=$client->HelloWorld();
  
  
}
catch (Exception $e)
{
    echo 'Caught exception: ',  $e->getMessage(), "\n";
}

print_r($response);
?>

good luck !
Asaf.
tatupheba at gmail dot com 20-Dec-2010 02:30
Hello folks!

A hint for developers:

When programming some soap server set the "soap.wsdl_cache_enabled" directive in php.ini file to 0:

soap.wsdl_cache_enabled=0

Otherwise it will give a bunch of strange errors saying that your wsdl is incorrect or is missing.

Doing that will save you from a lot of useless pain.
titan at phpdevshell dot org 06-Oct-2010 06:11
It should be noted that if you receive a return error : 'Object reference not set to an instance of an object.'. This could be due to something as simple as passing the incorrect parameters. When you look at this XML:

    <Get xmlns="http://example.com">
      <request>
        <CustomerId>string</CustomerId>
        <From>dateTime</From>
        <To>dateTime</To>
      </request>
    </Get>

Your code should look something like this:

<?php
        try {
            $options = array(
                'soap_version'=>SOAP_1_2,
                'exceptions'=>true,
                'trace'=>1,
                'cache_wsdl'=>WSDL_CACHE_NONE
            );
            $client = new SoapClient('http://example.com/doc.asmx?WSDL', $options);
// Note where 'Get' and 'request' tags are in the XML
            $results = $client->Get(array('request'=>array('CustomerId'=>'1234')));
        } catch (Exception $e) {
            echo "<h2>Exception Error!</h2>";
            echo $e->getMessage();
        }

$results = $client->Get(array('request'=>array('CustomerId'=>'842115')));
?>
marcovtwout at hotmail dot com 29-Jun-2010 08:30
If your WSDL file containts a parameter with a base64Binary type, you should not use base64_encode() when passing along your soap vars. When doing the request, the SOAP library automatically base64 encodes your data, so otherwise you'll be encoding it twice.

WSDL snipplet:
<element name="content" type="base64Binary" xmime:expectedContentTypes="*/*"/>

<?php
$string = 'data_you_want_to_send___like_xml_in_soap';
$soap_data = array(
        'foo' => 'bar',
      //'content' => base64_encode($string ) // don't do this
        'content' => $string //do this
);
$response = $client->Send($soap_data);
?>
marcovtwout at hotmail dot com 26-Jun-2010 06:20
Being new to SOAP, I was searching for a while to find out why my message was getting a response in soapUI, but not with my php code. The specific service I was addressing gives a HTTP 202 Accepted on success (no response), but returns a SOAP message on errors.

Situation:
Using an (authenticated) client connection, and a WDSL file, SOAP calls with type "One-Way" don't give a response header, even though a response is expected.

Solution:
When calling the client constructor, set SOAP_WAIT_ONE_WAY_CALLS in the $options['features'].
tim at tdinternet dot com 10-Jun-2010 08:05
PHP 5.2.11 seems to not be very picky about the correctness of a WSDL.

Other SOAP clients were complaining about schema and namespace issues, while PHP's SoapClient worked completely fine.  Fixing those issues for the other clients however broke PHP's SoapClient to the point where objects being passed to the SOAP method were becoming empty arrays on the server side.

Lesson learned:  some elements were being prefixed with xsd: and others were not -- make absolutely sure your WSDL is correct and consistent (I'm using a tweaked WSDL_Gen.php).
james dot ellis at gmail dot com 09-Jun-2010 07:06
I was having troubles getting responses from a Coldfusion SOAP server, with no obvious issues in the SoapClient used.

Eventually I found that the server was only accepting SOAP 1.1 requests and not 1.2. Not sure if this is  a system wide Coldfusion setting but if you hit the same wall, try setting the SoapClient option "soap_version" to the constant SOAP_1_1 (which is the default but mine was defaulting to 1.2 as the client was being reused for another service)
ajcartmell at fonant dot com 09-Jun-2010 03:57
There seems to be a problem with specifying empty strings for proxy_host and proxy_port options in recent versions of PHP (from a version later than 5.2.9, and equal to or earlier than 5.2.11).

Supplying empty string values for proxy_host and proxy_port causes "host not found" type errors: supplying NULL or FALSE works fine.
bhargav dot khatana at gmail dot com 11-Apr-2010 11:10
It took me longer than a week to figure out how to implement WSSE (Web Service Security) headers in native PHP SOAP. There are no much resource available on this, so thought to add this here for community benefit.

Step1: Create two classes to create a structure for WSSE headers

<?php
class clsWSSEAuth {
          private $Username;
          private $Password; 
        function __construct($username, $password) {
                 $this->Username=$username;
                 $this->Password=$password;
              }
}

class clsWSSEToken {
        private $UsernameToken;
        function __construct ($innerVal){
            $this->UsernameToken = $innerVal;
        }
}
?>

Step2: Create Soap Variables for UserName and Password

<?php
$username = 1111;
$password = 1111;

//Check with your provider which security name-space they are using.
$strWSSENS = "http://schemas.xmlsoap.org/ws/2002/07/secext";

$objSoapVarUser = new SoapVar($username, XSD_STRING, NULL, $strWSSENS, NULL, $strWSSENS);
$objSoapVarPass = new SoapVar($password, XSD_STRING, NULL, $strWSSENS, NULL, $strWSSENS);
?>

Step3: Create Object for Auth Class and pass in soap var

<?php
$objWSSEAuth = new clsWSSEAuth($objSoapVarUser, $objSoapVarPass);
?>

Step4: Create SoapVar out of object of Auth class

<?php
$objSoapVarWSSEAuth = new SoapVar($objWSSEAuth, SOAP_ENC_OBJECT, NULL, $strWSSENS, 'UsernameToken', $strWSSENS);
?>

Step5: Create object for Token Class

<?php
$objWSSEToken = new clsWSSEToken($objSoapVarWSSEAuth);
?>

Step6: Create SoapVar out of object of Token class

<?php
$objSoapVarWSSEToken = new SoapVar($objWSSEToken, SOAP_ENC_OBJECT, NULL, $strWSSENS, 'UsernameToken', $strWSSENS);
?>

Step7: Create SoapVar for 'Security' node

<?php
$objSoapVarHeaderVal=new SoapVar($objSoapVarWSSEToken, SOAP_ENC_OBJECT, NULL, $strWSSENS, 'Security', $strWSSENS);
?>

Step8: Create header object out of security soapvar

<?php
$objSoapVarWSSEHeader = new SoapHeader($strWSSENS, 'Security', $objSoapVarHeaderVal,true, 'http://abce.com');

//Third parameter here makes 'mustUnderstand=1
//Forth parameter generates 'actor="http://abce.com"'
?>

Step9: Create object of Soap Client

<?php
$objClient = new SoapClient($WSDL, $arrOptions);
?>

Step10: Set headers for soapclient object

<?php
$objClient->__setSoapHeaders(array($objSoapVarWSSEHeader));
?>

Step 11: Final call to method

<?php
$objResponse = $objClient->__soapCall($strMethod, $requestPayloadString);
?>
meltir at meltir dot com 29-Mar-2010 05:59
To those fighting with NTLM authenticated proxy servers, here's a solution I'm using atm:

<?php
/**
 * A child of SoapClient with support for ntlm proxy authentication
 *
 * @author Meltir <meltir@meltir.com>
 *
 */
class NTLM_SoapClient extends SoapClient {
   
    public function __construct($wsdl, $options = array()) {
        if (empty($options['proxy_login']) || empty($options['proxy_password'])) throw new Exception('Login and password required for NTLM authentication!');
        $this->proxy_login = $options['proxy_login'];
        $this->proxy_password = $options['proxy_password'];
        $this->proxy_host = (empty($options['proxy_host']) ? 'localhost' : $options['proxy_host']);
        $this->proxy_port = (empty($options['proxy_port']) ? 8080 : $options['proxy_port']);
        parent::__construct($wsdl, $options);
    }
   
    /**
     * Call a url using curl with ntlm auth
     *
     * @param string $url
     * @param string $data
     * @return string
     * @throws SoapFault on curl connection error
     */
    protected function callCurl($url, $data) {
    $handle   = curl_init();
    curl_setopt($handle, CURLOPT_HEADER, false);
    curl_setopt($handle, CURLOPT_URL, $url);
    curl_setopt($handle, CURLOPT_FAILONERROR, true);
    curl_setopt($handle, CURLOPT_HTTPHEADER, Array("PHP SOAP-NTLM Client") );
    curl_setopt($handle, CURLOPT_RETURNTRANSFER, true);
    curl_setopt($handle, CURLOPT_POSTFIELDS, $data);
    curl_setopt($handle, CURLOPT_PROXYUSERPWD,$this->proxy_login.':'.$this->proxy_password);
    curl_setopt($handle, CURLOPT_PROXY, $this->proxy_host.':'.$this->proxy_port);
    curl_setopt($handle, CURLOPT_PROXYAUTH, CURLAUTH_NTLM);
    $response = curl_exec($handle);
    if (empty($response)) {
      throw new SoapFault('CURL error: '.curl_error($handle),curl_errno($handle));
    }
    curl_close($handle);
    return $response;
    }
   
    public function __doRequest($request,$location,$action,$version,$one_way = 0) {
        return $this->callCurl($location,$request);
    }
   
}
?>

Requires curl and could be extended, but it works for my simple needs.
eric dot caron at gmail dot com 31-Jan-2010 01:26
Though pointed out by jan at bestbytes, and discussed in bug #27777, one common source of the "Parsing WSDL: Couldn't find <definitions>" error is from trying to access a WSDL that is protected by HTTP authentication. Passing the login/password in the 2nd parameter doesn't always work; so if you encounter this error message and are trying to access a protected WSDL file, try passing the username and password in with the first parameter.
Anonymous 10-Jan-2010 06:53
I had to struggle with a rather strange behavior when trying to consume standard Parlay X web services with no success. However, I found a remedy to my problem.

The problem which I faced was about an erroneous invalid HTTP basic authentication request sent to the web service. Although I was sending the right credentials, I was getting an authentication error. It turns out that PHP was sending HTTP requests to another endpoint which is not exposed directly through the web service and that end point does not require authentication.

My remedy for that issue was by using this simple lines in the example of using sendSms Paraly-X method.

First, creating a soap client without any HTTP authentication options:

<?php
$client = new SoapClient($wsdl_url);            
?>

The above request will cache the wsdl in the /tmp directory. Immediately after this construction we create another soap client, this time with HTTP authentication options:

<?php
try {                                           
        $client = new SoapClient($wsdl_url, array('login' => "griffin",
                                            'password'       => "password"));
} catch (Exception $e) {                          
        printf("Error:sendSms: %s\n",$e->__toString());
        return false;                             
}
?>

Now it should work without any problem. Without the second call, PHP will call sendSms without credentials resulting in a failed attempt due to missing authentication information. I found this procedure to be the simplest.

This process should be done every time the cached wsdl expires, or simply a one can increase the time-to-live for the cached wsdl from php.ini
jon dot gilbert at net-entwicklung dot de 12-Dec-2009 09:55
Note that creating a soap client for an invalid URL (you do test what happens, when a service is not available, right?) usually throws an exception which can be caught with try..catch. However, if xdebug is active you will get a fatal error, which obviously cannot be caught.
sloloem at gmail dot com 19-Oct-2009 01:14
I had an issue figuring out the use of classmap that took me quite a while to figure out.  I was assuming the WSDL type the docs were referring to was the name of the element being returned in the SOAP, so like,
<ns1:node id="8675309" />

and I was wondering why mapping
'classmap'=>array('node'=>'MyNode')

did nothing.
That's because in my WSDL I defined node as:

<xsd:element name="node" type="tns:nodeType" />

The classmap I needed was:
'classmap'=>array('nodeType'=>'MyNode')

I was able to find the type names using SoapClient->__getTypes()
Later, I realized where I could look inside the WSDL for the typename I needed.

I dunno if I missed something painfully obvious but maybe this can clear up some of the docs.
Jon 06-May-2009 03:13
We've had some problems using SoapClient connecting to an external server via Microsoft ISA (presently v.2006 but this may apply to other versions too). We supply the proxy_host, proxy_port, proxy_login and proxy_password but the ISA server reports the login in its logs as "anonymous".

Our sysadmin believes this is because PHP is not supplying NTLN information (Windows security protocol) in the correct format (and whether it should work with proprietary proxies is of course another debate). We'd tried "username", "DOMAIN\username" to no effect. The solution is to add an exception in the ISA server for the target hostname/IP; null can then be supplied for proxy_login and proxy_password and the connection should then work as expected.

On a slightly related note, if you are having problems make sure the port number is supplied as an integer. Some versions of PHP will not use the proxy with SoapClient if the port number is supplied as a string.
jan at bestbytes dot de 12-Feb-2009 07:32
You CAN get a wsdl, if basic authentication is required:

<?php

$login = 'bert';
$password = 'berts password';

$client = new SoapClient(
    'http://' . urlencode($login) . ':' . urlencode($password) . '@www.server.com/path/to/wsdl',
    array(
        'login' => $login,
        'password' => $password
    )
);

?>
info at nicksilvestro dot net 09-Nov-2008 10:40
For anyone having trouble with ArrayOf_xsd_string and getting an error similar to 'No deserializer defined for array type {http://www.w3.org/2001/XMLSchema}string'
Try using the 'features' param, set to SOAP_USE_XSI_ARRAY_TYPE - this makes sure the correct deserializer is used.

eg,
<?php
$client = new SoapClient("some.wsdl", array('features' => SOAP_USE_XSI_ARRAY_TYPE));
?>
sniper 27-Sep-2008 11:46
i was looking for a good example and couldnt find one,
finally found it somewhere(forgot where) i think this is
the best example to make a soap request with multiple params
  
$params->AWSAccessKeyId = AMAZON_API_KEY;
$params->Request->SearchIndex = 'Books';
$params->Request->Keywords = 'php5 oop';

$amazon = new SoapClient('http://webservices.amazon.com
/AWSECommerceService/AWSECommerceService.wsdl');
$result = $amazon->itemSearch($params);
taras dot dot dot di at gmail dot com 16-Sep-2008 09:23
This took me a while to figure out.

As described at the bottom of here: http://bugs.php.net/bug.php?id=38703

having xdebug may interfere with the constructor throwing exceptions
alex on reutone comma com 10-Sep-2008 06:53
To connect PHP SOAP to MS SOAP (CRM/EXCHANGE/...) I have created some classes using the explanation below and in other places.
www.reutone.com/heb/articles.php?instance_id=62&actions=show&id=521
naugtur at gmail dot com 19-Jun-2008 06:48
SoapFault exception: [Client] looks like we got no XML document in <document> has been already mentioned to occur when your server outputs something before <?xml ... > tag.

For all those having problems with that, and no access to the server code:
This is how to make a proxy that would clean responses for You

<?php
/**
 * Simple class taken from a note by James Ellis [in __doRequest() page of manual]
 */
class Proxy_Client extends SoapClient {
    protected $cacheDocument = "";
    public function __construct($wsdl, $options) {
        parent::__construct($wsdl, $options);
    }

    /**
     * SetCacheDocument() sets the previously cached document contents
     */
    public function SetCacheDocument($document) {
        $this->cacheDocument = $document;
    }

    /**
     * __doRequest() overrides the standard SoapClient to handle a local request
     */
    public function __doRequest() {
        return $this->cacheDocument;
    }
}

//put this code in your function or wherever You have all required variables set

$client = new SoapClient($wsdl_url,$settings_array);
$void=$client->$method($params);  //call this to get response from server
       
$response_string=$client->__getLastResponse();
       
//this part removes stuff
$start=strpos($response_string,'<?xml');
$end=strrpos($response_string,'>');   
$response_string=substr($response_string,$start,$end-$start+1);

//get your proxy prepared
$proxy = new Proxy_Client($wsdl_url,$settings_array);
//and fill it with the server's response
$proxy->SetCacheDocument($response_string);

$and_finally_the_result_is=$proxy->$method($params);

print_r($and_finally_the_result_is); //this allows You to see what's there

?>

$method is the method's name eg. $method='getVersion';
$params - typical params for a soap method
david at globulebleu dot com 09-Jun-2008 12:44
When using classmap option to map the SOAP results to a class, the constructor
of the object you've mapped to is not called.

$client = new SoapClient("url_to_wsdl",
   array('classmap' => array('contact' => "Contact"));

$params = array("1");

$contact = $client->__soapCall("get_contact", $params);

Expected result:

A contact object that has properties initialized (i.e. db connections,
....).

Actual result:

A contact object without the properties.

Thanks for your help.

David Georges.
Anno v. Heimburg 27-May-2008 10:23
> When using HTTP basic authentication, PHP will only send
> the credentials when invoking the service, not when
> fetching the WSDL.

The same goes for using an SSL client certficate, the SoapClient will only present the certificate on the actual remote call, not when getting the WSDL. The workaround is the same as above. HttpRequest works as expected.
cw at netresearch dot de 30-Apr-2008 01:24
The "cache_wsdl" option takes constants like WSDL_CACHE_NONE or WSDL_CACHE_DISK that are listed on the "SOAP constants" page -> /manual/en/soap.constants.php
james dot ellis at gmail dot com 29-Jan-2008 05:10
A note regarding boolean values that may seem obvious on reflection but could be a gotcha for some:

Seeing a SOAP request example with <SomeBooleanParam>true</SomeBooleanParam> may lead you to pass in string "true" or "false" as the parameter, which is incorrect - the correct method is to use boolean data types.

<?php
$client = new SoapClient($wsdl,$options);
$method = "DoSomething";
$params = new stdClass;

$params->SomeBooleanParam = TRUE;
$client->$method($params);
/**
 simplified request snippet would be
 <SomeBooleanParam>true</SomeBooleanParam>
**/

//this will also be correct, but not for the right reasons:
$params->SomeBooleanParam = "true";
$client->$method($params);
/**
 simplified request snippet would be
 <SomeBooleanParam>true</SomeBooleanParam>
**/

//this is where you may be wondering what is going on
$params->SomeBooleanParam = "false";
$client->$method($params);
/**
 simplified request snippet would be
 <SomeBooleanParam>true</SomeBooleanParam>
**/

//you need to do this instead
$params->SomeBooleanParam = FALSE;
$client->$method($params);
/**
 simplified request snippet would be
 <SomeBooleanParam>false</SomeBooleanParam>
**/
?>

Hope that helps!
giosh94mhz 08-Jul-2007 11:46
Oops!

I have written the wrong exception message in my last post.

The correct exception is:

SoapFault exception: [Client] looks like we got no XML document in <document>
lsmith at php dot net 08-Feb-2007 07:20
As noted in the bug report http://bugs.php.net/bug.php?id=36226, it is considered a feature that sequences with a single element do not come out as arrays. To override this "feature" you can do the following:

$x = new SoapClient($wsdl, array('features' =>
SOAP_SINGLE_ELEMENT_ARRAYS));
matt_schiros at academicsuperstore dot com 30-Nov-2006 12:26
When using classmap to map the SOAP results to a class, the constructor of the object you've mapped to is _not_ called.  This applies to the PHP5 __construct() and the PHP4 ClassName() constructors.
Marius Mathiesen 01-Mar-2006 04:57
I kept having a problem using an HTTP proxy with SOAP. The proxy_port parameter has to be an integer, ie. "proxy_port"=>"80" won't work, you'll have to use "proxy_port"=>80.

HTH,
Marius
php at sowen dot de 22-Dec-2005 06:40
If you're using CLI and there are multiple IP addresses available for outgoing SOAP-requests, try this "secret" to set outgoing IP:

e.g. for local IP 10.1.4.71:

$opts = array('socket' => array('bindto' => '10.1.4.71:0'));
$context = stream_context_create($opts);
$client  = new SoapClient(null, array('location'=>'http://...','uri' => '...','stream_context' => $context));

You can also set other options for the stream context, please refer to this page:

Appendix M: http://www.php.net/manual/en/wrappers.php

Bye,
   Nils Sowen
jared at ws-db dot com 28-Aug-2005 02:31
If you connect to a SoapServer, that has been created with session persistence, you can access the server's session id via SoapClient->_cookies[<session_id_name>][0]. This property becomes available after your first client method call.

I have only tested this with session.use_cookies=1.
Arjan van Bentem 11-Aug-2005 11:31
When using HTTP basic authentication, PHP will only send the credentials when invoking the service, not when fetching the WSDL.

To solve this, one needs to fetch the WSDL manually (or using PHP, of course!) and store it on the file system. Obviously, the first parameter for SoapClient(..) then needs to refer to that local copy.

Alternatively, the user annotations at http://nl3.php.net/manual/en/ref.soap.php state that one could encode the login and password into the URL as well.

See http://bugs.php.net/bug.php?id=27777
Jim Plush 11-Jul-2005 12:56
As of version 5.0.4 you can now dynamically change your location even if you're using a wsdl

<?php

$client = new SoapClient("http://some.host.net/wsdl/somefile.wsdl",array(
    "location" => 'myurl.com'));

?>

notice you can now use the "location" key.
This means you can have the same wsdl file not define a location until runtime which is great if you have a development test site or if you distribute your files to other companies.
Prior to this change you would have to ship a custom wsdl file to every client you had with their location hardcoded.
Brian Grayless 04-Mar-2005 02:30
Using a WSDL file is the way to go, however, for my particular application, the LOCATION:PORT needed to be dynamic so that my SOAP clients would be able to call a different service based on the client domain.

If you are using a WSDL, SoapClient() requires a URL direct to an actual URL and does not let you use a PHP file that outputs the dynamic WSDL XML in its stead. So, I ended up making a separate WSDL for each possible service needed and had to maintain them all if the service description changed.

Finally, after some fiddling, I was able to create a PHP page with the proper Mime type headers so that I could then trick SoapClient() to think that it was being passed a file with a ".wsdl" extension.

Example:

<?php

// filename: wsdl.php

header('Content-Type: application/xml; CHARSET=gb2312');
header('Content-Disposition: attachment; filename="filename.wsdl"');

$wsdl = 'path/wsdl_name.wsdl';

// read in file
$handle = fopen($wsdl, "r");
$wsdl_xml = fread($handle, filesize($wsdl));
fclose($handle);

// put code here to replace url and port in xml

echo $wsdl_xml;

?>

Now, in order to make this work, you can't just call a relative path to the file. I believe it has to go through Apache to properly set the mime type headers, etc... So you would use a full "http://....." address as the path to the wsdl.php file.

<?php

//... somewhere in your soap client code

$wsdl_loc = "http://yourdomain.com/wsdl.php";

$soap_client = new SoapClient($wsdl_loc, $client_param_array);

?>

Another, perhaps not so clean, way of achieving this would be to modify your .htaccess file in the directory where your WSDL file exists to force ".wsdl" files to run through the PHP engine. Add the following to your .htaccess:

AddType application/x-httpd-php .php .wsdl

You can then put dynamic PHP code snippets in your *.wsdl files to change whatever values you need to.

There are pros and cons to each solutions. The Mime solution probably taxes the system more as it has to read the file in every time a soap request is made. The htaccess solution makes it so you have to depend on either a modified .htaccess or Apache conf file.

Perhaps if you set the "soap.wsdl_cache_enabled", using ini_set(), to 1 (default), the caching will make it so it doesn't read the file every time for the Mime solution.

CopyRight © 2008-2022 verySource.Com All Rights reserved.　京ICP备17048824号-1　京公网安备：11010502034788